Genie SLC-24 Lift

24ft Material Lift

For Hire

The Genie SLC-24 is the tallest material lift in the Superlift Contractor range, designed for contractors, installers, and maintenance teams working at full commercial ceiling height. With a maximum lift height of 24ft (7.32m) and a load capacity of 295kg (650lb), it raises and positions heavy materials safely with one operator on the ground. Its aluminium telescoping mast, quick tool-free setup, and captive stabilisers make it ideal for high-level indoor work including HVAC installation, ductwork, warehouse racking, and plant room maintenance.

Key Features:

Maximum lift height: 7.32m (24ft)
Load capacity: 295kg (650lb)
Two-speed manual winch, no power source required
Captive stabilisers for a solid base at full height
Non-marking casters for finished indoor floors
Ideal for warehouses, fit-outs, and high commercial ceilings

Working Height Standard Forks – Forks Up (m)	7.32
Height Stowed (m)	2.18
Length Operating (m)	2.06
Stowed Width (m)	0.80
Width Operatin (m)	1.68
Load Capacity	0.36m load centre – 295kg 0.61m load centre – 193kg 1.07m load centre – 73kg
Unit Weight (kg)	157

24ft Material Lift Hire for High-Level Indoor Work

The 24ft material lift is the tallest reach in the range, built for getting heavy materials up to full commercial ceiling height with one operator on the ground. As the Genie SLC-24, it reaches 7.32m and lifts up to 295kg, run by a two-speed manual winch with no power source needed.

It comes into its own where the 18ft runs out of height: warehouse racking, tall retail fit-outs, plant rooms, and any install where the ceiling sits beyond standard reach. HVAC crews use it for high-level ductwork and units. Electricians and fit-out teams use it for lighting runs, cable trays, and signage at height. For outdoor or rough-terrain reach beyond what a material lift offers, knuckle boom lift hire covers articulated high-access work. Maintenance teams use the 24ft lift wherever a load needs to go up and hold steady while it’s fixed off.

Capacity moves with the load centre, which matters more the higher you lift. Close in at 0.36m you get the full 295kg. Push the load out to 1.07m and capacity drops to 73kg. Plan the lift on both the weight and the reach, and the machine handles the rest.

At 157kg and 0.80m stowed width, it still fits through standard doorways and rolls on non-marking casters across finished floors. Captive stabilisers give it a wide, solid base once set, so it stays steady through the full 7.32m.

Longreach hires the 24ft material lift with fast material handler hire across Sydney from the Taren Point depot. Only need standard ceiling height? The 18ft material lift is the lighter option.

1300 856 053 Enquire Now

24ft Material Handler For Hire Sydney New4

Frequently Asked Questions

The 24ft material lift raises materials up to 7.32m for high-level indoor installation and maintenance. It’s used to position HVAC units, ductwork, lighting, cable trays, and signage in tall commercial spaces like warehouses and plant rooms. One operator runs it from the ground.

The 24ft material lift reaches a working height of 7.32m (24ft) with forks up. Stowed height is 2.18m, so it still fits under standard door frames for transport and storage despite the extra reach.

The 24ft material lift carries up to 295kg. Capacity depends on the load centre: 295kg at a 0.36m load centre, 193kg at 0.61m, and 73kg at 1.07m. The further the load sits from the mast, the lower the safe capacity.

Both lift up to 295kg, but the 24ft reaches 7.32m against the 18ft’s 5.64m. Choose the 24ft for tall warehouses, plant rooms, and high commercial ceilings. The 18ft is lighter at 139kg versus 157kg and suits standard ceiling work.

No high risk work licence is required to operate the 24ft material lift in NSW, since it lifts materials rather than a person. Operators should still be trained in correct setup, load limits, and safe use before running the machine.

Hire rates for the 24ft material lift in Sydney depend on the hire period, day, week, or month. Call Longreach on 1300 856 053 for current pricing and fast delivery across Sydney.